Vacuum degasser

3.1 Product introduction:

Vacuum degasser uses vacuum at low temperature to remove the air (oxygen )in milk or fruit juice, restrain browning, prevent pigment, Vitamin C, fragrant content and other materials from being oxidized and enhance the quality.

It can remove the gas absorbed on the pulp granules to prevent the upper floating of granules and maintain good appearance of product.

It can reduce the bubbling during the canning and sterilization.

It can be fitted with the sterilizer unit to realize full-automatic control.

Main parts of vacuum degasser :

The equipment consists of a vacuum degassing tank, vacuum pump, and centrifugal pump, featuring food-grade stainless steel construction with silicone rubber seals. It offers a processing capacity ranging from 500 to 15,000 L/h and a vacuum range of -0.064 to -0.087 MPa.

Operating on Henry's Law, it physically reduces pressure to release dissolved gases, which are expelled from the system via an automatic exhaust valve.

Supporting fully automated operation and parallel installation of multiple units, it offers technical advantages including cavitation elimination, noise reduction, and enhanced heat exchange efficiency. Typical applications include juice degassing for preservation, liquid milk production support, and free gas treatment in circulating water systems.

Degassing on the production lines for dairy products, juices, etc.

More information you can contact us :

Email : [email protected]

Whatsapp: +8613918733638

Wechat: LV06090709

This equipment is essential for degassing operations in production lines handling dairy products, fruit juices, and similar materials.

The functions of vacuum degassing machines include: Removing air (oxygen) from liquid materials to inhibit oxidation of pigments, vitamins, aromatic compounds, and other substances, thereby preventing quality degradation; Eliminating suspended micro-particles of gas within the liquid to suppress particle flotation and maintain visual integrity; Preventing foaming during canning and high-temperature sterilization that could compromise sterilization efficacy; Reducing corrosion on container inner walls to provide anti-corrosion protection.

1. Significantly reduces the venting time after initial filling of heating or cooling systems, greatly facilitating initial commissioning and operation.

2. Removes gases from the system to prevent air locks, ensuring stable and reliable operation during normal service.

3. Eliminates pump cavitation and reduces system operating noise.

4. By removing oxygen from the water, it reduces oxygen-induced corrosion and extends equipment service life.

5. Prevents gas bubble formation on heat exchanger surfaces by removing dissolved gases, enhancing heating efficiency.

6. Deaerator operating time and cycles are adjustable as required.

7. Single unit capacity up to 150 m³; multiple units can be connected in parallel.

8. Easy installation, fully automatic operation, safe and reliable, with simple maintenance.

Q1:Which city are you in? How can I get to your factory? Are you a trading company or factory?

A1: We are in Shanghai City, China . It will take 1 hour from PVG and HongQiao Airports to our factory .

We are a manufacturer with trading branch office .

Q2: Why is your price higher than others?

A2: We offer high-end machines in our business. Welcome to our factory to have a visiting. And you will see the differences in our working plant.

Q3: What is the equipment delivery time?

A3: Normally 30-60 working days depends on different machines,

Heat Exchanger making period : within 15 working days .

Tubular UHT Pasteurizer making period : within 30 working days .

Aseptic UHT sterilizer making period : within 50 working days .

Homogenizer and CIP cleaning system making period : within 50 working days .

Blowing & filling & Labelling Machine making period : within 50 working days .

We can shorted the making period according to the working situation .

Q4: How to install your machines when it arrives? How much the cost?

A4: First we can supply the drawing for reference , the equipment will delivery as a whole set machine .

Or We will arrange our engineers to your factory to install the machines and train your staff how to operate the machines If you need.

Customers will take charge of the Accommodation one site and our engineer fee for commission is USD300/day/person.

Or you can arrange you engineers to study at our factory. You are responsible for air tickets,

Q5: How long time for installation and testing ?

A5: Subject to machines and the situation in your factory. If everything is

ready, it will take about 5 days for installation, and 5-10 days for testing and training .

Q6: How about the spare parts?

A6: We will send one year enough easy-broken spare parts together with the machines for free.

Q7: What is your guarantee?

A7: We have one year guarantee sine the equipment is Acceptable debugging and supplying life-long technical support. Our service is also including machine maintain and spared parts .

Q8: What is your payment term?

A8: Single equipment payment item : 50%T/T as advance payment, then 50% TT payment before shipping. ( L/C is also supported) .

The turkey processing line payment item : 40%T/T as advance payment, then 60% TT should be paid before shipping.